Travertine stone is a kind of building material which is used in its pure form, which is generally found in nature, and is very durable and long lasting. The colors are usually brown. These stones, which can be found in light or dark tones, are usually found in warm tones of brown. Travertines are first removed from the travertine quarries. It is then shaped in factories. Generally, the nature of the substance is maintained during processing. Shaped without using chemicals and colorants. There are different methods for shaping and cutting travertines. The texture of the material varies according to different sections. Although it does not seem solid due to its perforated structure, it is actually a very hard and durable stone. Optionally, the cavities are filled with various fillers to make these natural stones even more durable.
One of the best known properties of travertine tiles is that it is a non-slip building material. For this reason, it is frequently used on wet surfaces such as poolside, shower cabin and bathroom surfaces, piers and beach areas. This affordable and high performance material is one of the most preferred natural stones. Another important feature is that it is quite robust and durable. Travertine stones, which are frequently preferred in walls and pavements, are very successful materials in terms of price performance. You can safely use travertine stone pavements which will be a long term investment for years. Travertine marble and stones cut in various lengths and patterns are frequently used for decoration. As a complement to the decorations with its elegant and noble appearance, it is a material that has always been seen and has increased its popularity in recent times.
You may also like: 11 Facts about Travertine Tiles
How to Clean Travertine Tile
Abrasive chemical cleaners or acidic products should not be used to clean travertine tiles. Travertine stone is by nature an alkaline substance and may come into contact with acidic materials and stain and discolor.
- Regular cleaning
Sweep or vacuum the floor weekly to remove small dirt and sand particles that may cause small abrasive marks on the travertine tile surface. Over time, these tiny particles can also degrade the gloss of the material by removing the protective sealing coating, leaving the stone beneath it vulnerable to discoloration and staining.
- Wiping Travertine Tiles
The best way to mop a travertine tile is to use warm, flat water, apply with a dry mop or sponge, and so that the surface is barely moistened. Do not impregnate travertine tiles with water, as they may penetrate outside the sealant or grout lines; this leads to discoloration, deterioration and mold formation.
- Disinfect Travertine Tiles
For disinfection purposes, a soft, non-acidic dish soap may be added to a gallon of water and used to clean travetine tiles. However, when this is done, the surface must be mopped a second time with clean water to remove any remaining residue. Using a dry towel is also recommended. Disinfection does not have to be done with every wipe, but it is a good idea to do it once a month.
- Cleaning Grout Lines
The mortar lines between the tiles allow the material to expand and contract during seasonal temperature fluctuations, preventing individual parts from rubbing and cracking each other. However, travertine flooring can be the most vulnerable point in your installation because these areas are susceptible to water leakage, stains, discoloration, and growth of the dark, ugly and unhealthy mold.
To clean the travertine mortar lines, mix an equal amount of baking soda and water and form a sandy paste. This can be applied with a small brush on the grout, allowing you to wash the areas between the tiles without scratching the edges and damaging the material. This can be done completely, as the joints themselves will not wear or damage under pressure.
Commercial mortar cleaners used for ceramic tiles usually contain bleaches. Do not use them on travertine plates, as bleach can corrode the stone.
- Sealing Travertine
One of the biggest problems with natural travertine flooring is that the travertine tiles have microscopic pores that can absorb liquids on the surface, causing stains, discoloration, material deterioration and mold formation. The way to combat this is to ensure that the material is properly sealed both during and after the installation and then periodically throughout its existence.
There are two types of sealing material used in travertine floors. The first is a material that seeps down and clogs the pores, making it difficult to invade moisture from the stone, penetrating deeply. A surface protective sealant may then be used to form a clean coating on the top of the tiles, thereby preventing staining agents from discoloring.
After the first sub-surface sealant has been brushed, the barrier surface coatings are generally re-applied every few years to maintain the protective properties of this process.
Travertine tiles tend to be light in color, but adding sealant can deepen these shades and give them a slightly glossy appearance. Some people like this, and if this is the effect you want, you should often re-apply the sealant. On the other hand, some people prefer a worn look that can be achieved by using less. Most stone manufacturers recommend a period of three to five years for optimal protection of the floor.
Travertine is a very elegant, first-class flooring material, and regular cleaning and sealing make it look its best for decades.
In this content we tried to explain how to clean travertine files in 5 steps. You can contact us at any time for more information.